<rt id="mk4em"></rt>
<acronym id="mk4em"><center id="mk4em"></center></acronym>
<acronym id="mk4em"></acronym>
<acronym id="mk4em"><center id="mk4em"></center></acronym>
<sup id="mk4em"><div id="mk4em"></div></sup>
Pioneers In Trenchless Sewer, Water and Gas Lines Replacement with a very Minimum Yard Damage
  •  Storm Drains
  •  Sewer Repair
  •  Tankless Water Heater
  •  Trenchless
  •  Trenchless Gas Lines
  •  Water Heater
  •  Drain Cleaning
  •  Plumbing
  •  Repipe Plumbing
Plumbing & Drain Solutions
Emergency Services
Available 24/7 - 365 Days
Trusted & Recommeded Since 2000
Licenced - Insured - Bonded
Full Service Plumbing & Drain Cleaning
Immediate Rescue Response
Good Driving Record
Never a Overtime Charge
You Know the price before we start
We Guarantee Workmanship
Sewer and Water Damage Restoration
Sewage Clean Up
Water Flood Clean UP
Water Damage Repairs
Structural Damage Repair
Crawl Space Clean Up
Business Report -  Plumbing,  Drain Cleaning Tax Credit -  Plumbing,  Drain Cleaning Coupons -  Plumbing,  Drain Cleaning Newsletter -  Plumbing,  Drain Cleaning
10% off Any Trenchless
Gas Line

Life Time Warranty

After Mr. Drain ® Plumbing has performed the trenchless process on your Gas line system, the work is guaranteed for as long as you own your home. This guaranty includes parts and labor that was utilized to get the whole job done. This means that you will never have to worry about the expense of repairing a leak, crack or a breakage or the potential insurance problems associated with leaks or cracks. Even if your son or daughter inherits your house or you sell your house the lifetime warranty will be transferred to the one who will own the house. No other plumbing company will offer such great benefits but this is only Mr. Drain ® promise.
Trenchless Gas Line Benefits
  • Problems are completely solved because the line is totally replaced, not just repaired
  • The cost of installing HDPE Gas pipe with the pipe bursting method is much less than total replacement by conventional trenching techniques
  • Drastically reduces the public inconvenience and disturbance to the environment caused by traditional repairs
  • Can be performed in tight access areas where open cut methods present a challenge or are not an option
  • Install high-quality pipe that is the same diameter or larger than the original pipeline for increased flow capacity
  • Over 20 years of pipe bursting experience
  • Trained Mr. Drain ?technicians have the expertise to see the job through every step of the way
  • In-house capability to assist the engineer and the owner designing the project by recommending the best rehabilitation methods and materials
  • Mr. Drain ? Pipe Slice ?allows for replacement of pipes without disturbing surface structures.
  • Potential problems with existing pipes are minimized because pipe-bursting methods follow the existing pipe path.
  • For smaller sizes of pipe, pipe bursting is the only trenchless technology that can be used to upsize the existing pipe.
  • Because it is trenchless, excavation is minimized, which lessens effects on existing landscaping and structures. The bursting head or the slicing head on the piercing tool can be removed at the end of the line so that the tools may be removed through the new line. This can eliminate the need for an exit pit in some instances.
  • Mr. Drain ? Pipe Slice ?reduces the amount of site restoration required.
  • In Mr. Drain ? Pipe Slice ? process, a minimal amount of excavation is required to place the machine and insert the new pipe into the original.? These excavations need only be pits that can be shored to prevent collapse or cave-ins, thus increasing worker safety during the rehabilitation process.
  • No damage to landscape
  • No damage to concrete area
  • No damage to drive ways
  • Life time warranty of no further leaks
  • Stability to withstand subtle ground movement
  • Saves time as most cases job is done in one day
  • Great savings over traditional methods of repairs
  • Very minimum yard damage
  • The new pipe can be upsized to twice to the size of old pipe
Gas line Safety

Natural gas is without question the most potentially dangerous thing in your home. The results of negligence and carelessness with this explosive and flammable resource can have devastating effects. As such, we believe your efforts to maintain a safe gas environment, while preparing for the worst, deserve extra consideration.

Gas lines must be properly installed, maintained, and monitored frequently. Otherwise, very serious consequences can be the result. Following are some recommendations that Mr. Drain ® Plumbers have mentioned for your safety.

  • When performing construction projects around or near your service meter, never pour concrete or put asphalt around the rigid gas delivery service pipe leading to the meter. The pipe must remain in soft and pliable dirt to accommodate any seismic activity.
  • Know the location of your gas meter and do not allow it to be exposed or damaged by accidental contact. Should the potential exist for being run into by a vehicle, place heavy metal pipes in concrete around the meter. You can inform your utility provider of your concerns. They may offer to assist you.
  • Keep a gas line shutoff wrench accessible in the event of an emergency. It's acceptable to secure the wrench to the meter for quick access. The shut-off valve typically only needs to be turned 1⁄4 turn to close off delivery.
  • Review all gas line connections to appliances within your home to insure they have a separate shutoff valve, and are connected properly to the rigid service line by either yellow epoxy-coated flexible or corrugated stainless steel piping.
  • Take a moment to review the location of your meter. Standing at the meter, look directly overhead. Are you positioned within the drip line of the roof's edge? If so, it's possible melting water and snow from the roof and refreezing on the meter could create an unsafe environment within the house. Consult with your gas provider for the preferred solution.
  • Never begin digging in your yard to install or replace fence posts, trees, bushes, etc. without calling your local utility company for delivery piping location information.

Heating Safety & Efficiency

Have your heating system inspected by a qualified contractor every year before the heating season begins. The contractor should provide the following services:

  • Check the heat exchangers for cracks, rust and corrosion.
  • Clean and check the flue and vent pipes for any obstructions, corrosion or pipe separations.
  • Check your heating system, or have it tested, for proper ventilation.
  • Clean or replace all furnace filters.
  • Check blower operation, clean and lubricate.
  • Check and adjust any pilots and burners.
  • Check that your gas appliances produce a sharp blue flame.
  • Check all electrical connections and controls.

Always keep flammable materials outdoors, in approved containers and away from your furnace, water heater and all other natural gas appliances.

Protecting Your Family From Carbon Monoxide

Carbon monoxide is a colorless, odorless and potentially dangerous gas produced when fuel (heating oil, propane, kerosene, charcoal, gasoline, wood or natural gas) is burned without enough air for complete combustion. If inhaled in large quantities for a prolonged time period, carbon monoxide can cause unconsciousness, brain damage and even death.

Learning to identify the symptoms of carbon monoxide poisoning is the first step toward protecting you and your family. These symptoms include:

  • Fatigue
  • Coughing
  • Headache
  • Irregular breathing
  • Dizziness
  • Overall paleness
  • Nausea
  • Cherry red lips and ears

If you, or anyone in your household, experience these symptoms, immediately open windows and doors to ventilate your home, then move outside and call 9-1-1 or the fire department.

There are a number of steps you can take to minimize the dangers of carbon monoxide poisoning, including:

  • Have your chimney, appliances and heating equipment inspected and tested by a qualified professional every year.
  • Install ventless heaters in accordance with manufacturer specifications, never using them as a primary heat source.
  • Install at least one carbon monoxide detector in your home. Do not rely on carbon monoxide detectors as a substitute for maintaining appliances, heating equipment or chimneys. If you do choose to install a carbon monoxide detector, use it as an additional preventative measure.*
  • Clear snow and ice from exhaust vents and intake air vents for gas appliances to prevent carbon monoxide from accumulating in your home.
  • Never use a gas oven or stovetop for heating your home.
  • Never run a gasoline engine (such as a gasoline generator) or an automobile in an enclosed space.
  • Never use a portable charcoal or propane grill indoors.
*You should make sure that any carbon monoxide detector you consider for purchase is listed by Underwriters Laboratories (UL) to the current UL 2034 standard, "Carbon Monoxide Detectors." National Fuel does not endorse or recommend any specific brand of carbon monoxide detector.

Trenchless Gas Line Repair - Trenchless Gas Line Contractor - Pipe Slice Service - Trenchless Company - No Dig Gas Line Repair
and Fix in

Punctuality Is Reality Here™
Do you have a high Gas bill? - Is your Gas line leaking in the driveway? - Do you want to replace the Gas line by trenchless? - D you want a pipe bursting service? Do you want to replace Gas line without digging? - Do you want to replace Gas line without trenching? - Do you want a trenchless service for Gas line? Do you want a trenchless service for Gas line? Are you looking for a reliable licensed trenchless and pipe slice contractor? Are you looking for affordable trenchless Gas line service? Do you want to replace Gas line without breaking the driveway?
If you have high Gas bill or frequent Gas leaks then you should replace the Gas line by trenchless or pipe slicing. There may be a possibility the Gas is leaking somewhere in the front yard or driveway. A Mr. Drain ® Pipe Slice ® technology is used to replace any Gas line by trenchless with very minimum damage to your yard and landscape.We are available 24 Hours a Day 7 Days a Week.
On Any Trenchless Gas Service - Trenchless Gas Line Repair - Trenchless Gas Line Fix - Pipe Slice Service in - Gas Line Replacement by Piercing
The Home Flash Diagram Below is courtesy of Mr. Drain ® Plumbing of that is designed to give you detailed informational hands on about the plumbing and drainage system in your house. Take a moment and browse the links in this image by bringing mouse on the text. Some text will have additional informational links
 drain cleaning,  drain cleaning services,  sewer drain cleaning,  drain clean,  blocked drain,  unblock drains

  Plumbing A to Z       Drain A to Z
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z     A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Mr. Drain ® Pipe Slice ®
Trenchless Gas Line Replacement
Average American homeowners and businesses enjoy the comfort from the appliances that run on Gas. The municipal Gas line is located under the street, and you connect to the Gas under your property, and into your home. Simply turning theGas valve located by the meter delivers enough flow of Gas for cooking and heating purposes. There are many reasons why your Gas line may require repair work. Gas line problems can be the result of tree roots getting in the pipe, mineral build up and residue, high Gas pressure, ground movement, acidic soil conditions, and general deterioration of the Gas pipe over time. Gas main line problems are sometimes worse than water lines. Many older homes will need their Gas mains replaced due to the age of the pipes. These installations can be difficult. For those homeowners and businesses in Mr. Drain ® Plumbing have years of experience in repairing and replacing Gas mains. A Gas main that is replaced can result in better Gas flow to the residential or commercial property, which increases your Gas flow. If your property is experiencing slow or low pressure Gas even though your Gas pipes look new from outside, this may be an indication that you need a new Gas main line.

The Gas leaks in the front yard or driveway mostly result because of offsets, cracks, breaks in pipes settled pipes, rust build up in the pipes, old age of pipes. At Mr. Drain ® Plumbing of our experts not only can repair the leaking or broken pipe but also have art of replacing the Gas main line wit out braking the driveway or digging trenches
The Problem

The Gas lines leak when they corrode rust and break. Following are some of the major reasons why Gas lines break, crack or leak.

  • Broken, Cracked, Offset or collapsed Gas pipe
  • Damaged pipes due to the shifting of soil
  • Damaged pipes due to weather effect on above and bellow earth pipe
  • Frozen ground, settling
  • Rust build up in the Gas lines restricts flow
  • Improper because of rust
  • Leaking joints from connectionsand straight run
  • In case of SS and SDR crack and break due to hardness of material
  • Tree or shrub roots have invaded the Gas line
  • Break, Leak and Crack in case of metal pipes after some passage of time
The Solution
The word "TRENCHLESS"means no trench or doing something without trenching and digging. This can be the process of repair or replacement of sewer, Water and Gas lines without opening a trench. Now it does not mean that trenchless does not requireany digging or trenching at all, still the access points are digged to insert new pipe. trenchless pipeline replacement can save a homeowner's yard, landscaping, or rockery from being disturbed. It also allows for pipeline replacement in areas where it is not accessible to excavation equipment and would otherwise have to be dug up by hand or by heavy equipment. Mr. Drain ®uses Pipe Slice ®Trenchless technology also called " Pipe Slicing " to replace Gas lines from size 1" to 4". As the name implies, stands for subsurface construction works where less trenches or no continuous trenches are required to be dug. It is a rapidly growing sector of the construction and civil engineering industry. It can be defined as "A family of methods, materials, and equipment capable of being used for the installation of new or replacement or rehabilitation of existing underground infrastructure with minimal disruption to surface traffic, business, and other activities. This process involves inserting new line if the old line cannot be sliced. In that case a bullet head is powered using a high power air compressor and it pulls the new SDR (Poly- Ethylene) Gas line.
On Any Trenchless Gas Service - Trenchless Gas Line Repair - Trenchless Gas Line Fix - Pipe Slice Service in - Gas Line Replacement by Piercing

How Trenchless Gas Line Replacement works?

Mr. Drain ® uses Pipe Slice ® Trenchless no dig technology to replace the Gas lines without opening big trenches. Following is the detail description that what are the conditions in which you need to replace your gas lines and what is the trenchless no dig technology and how it works. Mr. Drain ® Trenchless Service provides Gas line replacement using the Pipe Slice ® Trenchless technology. This is a method of replacing an old Gas pipe with a new poly-pipe of the same or a larger inner diameter.Two holes are excavated in areas of replacement. A very minimum yard will be damaged in this process. The landscape will be covered with protectors so no landscape is damaged. A Pipe Slice ® process is used in which the slice head is used to cut through the pipe from one point to the other. In some cases trenchless toll is used to bore a hole from one hole to the other. The max length between holes varies. A poly-pipe or SDR pipe is then pulled through and the final connection are made. The inspections are done with the city inspectors. The system is flushed so all debris are released to deliver you required flow ofGas. Further inspections are done for leaks and remaining debris is cleaned. A worse scenario is if the Gas main is completely broken which can completely block access to Gas for the affected building. Although local governments, controlsall major Gas mains or access pipes to Gas mains and the utility company in your area is responsible to maintain and repair the gas problems up to the meter.

Repair or Replace Water Lines by Pneumatic Piercing or Bullet process
This process involves repairing or replacing the Gas lines by line piercing, boring or drilling using the bullet kind of tool. An underground piercing tool is also known as a boring tool. It is air driven and typically used when soil conditions make tunneling by hand difficult. It is also utilized when making additional excavations or trench work. Like other trenchless process this method also involves to dig two holes one on each side. The typical piercing tool is between 3" and 4" in diameter, although other sizes are made as well. They are in a shape similar to a missile. This tool is air powered and has a piston inside the body that pushes the head forward and drives the tool itself into the soil. When the piston and the head of the tool retract it is at a lower rate of speed so it remains imbedded in the surrounding soil. Each push forward allows it to penetrate further into the soil until eventually the tunnel is completed.There's a piston that runs inside the barrel of the tools; it's the inertia of the piston striking the nose of the tool that moves it forward in the ground. A portable compressor runs the piercing bullet. The bullet head requires 80 to120 psipressure. The pneumatic tools offer an economical alternative to pipe bursting and other trenchless methods when replacing 30- to 500-foot-long service lines, two inches in diameter and smaller.
In many cases you will only need to replace a section of the Gas line. Damaged sections of Gas pipes can be replaced with high-quality piping. In other cases, you may need to replace the entire Gas line if there is significant damage throughout the pipe. After installation the repaired or replaced Gas line is pressure tested for any leaks. An inspection and approval by the municipality is then performed. After this, your landscaping will be restored to their condition prior to the Gas line repair work

The image bellow is the courtesy of Mr. Drain ® Plumbing of to give you a detailed idea about how Pipe Slice ® process of replacing Gas lines work using Piercing or Bullet process.

On Any Trenchless Gas Service - Trenchless Gas Line Repair - Trenchless Gas Line Fix - Pipe Slice Service in - Gas Line Replacement by Piercing
Repair or Replacement of Gas Line by Pipe Slitter process

Like the name represents this Trenchless process of Gas line replacement involves slitting or slicing of the old Gas line.
The trenchless Gas pipe replacement device includes a cable pulling device, a length of cable, a pipe splitting device and a cable end piece. The ends of the existing pipe are exposed, and the cable is fished through the pipe from a front end to a rear end. A cable end piece, that includes a relatively flat pipe end engagement surface, is then engaged to the end of the cable proximate the rear end of the pipe to be replaced. A suitable length of replacement pipe is then attached to the cable end piece. SDR pipe is used in the replacement of Gas Line. At the front end of the cable a Hydraulic cable pulling device is installed.The pulling cabled is connected to the Hydraulic puller. The Hydraulic puller starts pulling the cable and the Slitting Head starts breaking or slicing through the existing pipe, such that the pipe-contacting surface of the cable end piece makes contact with the rear end of the pipe. Further pulling of the cable by the Hydraulic pullercreates sufficient tension and pulling force on the rear end of the pipe that the pipe becomes dislodged from its location within the ground. Further this pulling process results in the existing pipe being pulled through the ground by the force of the cable end piece upon the rear end of the pipe, and the replacement pipe is pulled into the cavity due to its attachment with the cable end piece. Hence in this process the Slitting Head slices the old Gas pipe and new pipe is pulled until the slitting head reaches to its destination. If the dirt is soft the old pipe is also pulled out with the slitter but if the dirt is hard the slitter head slices the old pipe and it stays in the dirt.

The pipe splitter is engaged at the front end of the pipe to split the pipe as it emerges. The pipe splitting device includes a tapered nose portion having a nose tip that is inserted into the front end of the pipe prior to the activation of the Hydraulic puller. The nose portion of the pipe splitter preferable includes a cable groove, which guides the cable towards the cable pulling device, and a sharpened edge, which serves as a splitting force focal point for splitting the pipe as it is pulled. In the preferred embodiment, the tapered nose is formed with a taper angle of from 1° to 15°, and preferably approximately 2°. To place the cable pulling device out of a direct line of the emerging pipe, the pipe splitting device is preferable formed with an elbow having an angle of from 20° to 90°, and preferably approximately 30° to 35°.

Repair or Replacement of Gas Line by Pipe Slice ®

Gas is typically supplied to buildings, whether commercial or residential, through Gas pipes that are buried in the ground. These Gas pipes are typically galvanized steel pipes, although copper, plastic and other pipe materials are sometimes utilized, and such Gas pipes typically have a diameter from approximately ½ inch to approximately 4 inches. For various reasons, such as corrosion or puncture, it can become necessary to replace the existing pipe with a new Gas pipe. Typically, this replacement process involves the digging of a trench in the ground along the path of the existing pipe to expose it, remove it and install a replacement pipe. Such trenches can be expensive and disruptive of landscaping and perhaps a structure that has been placed over the existing pipe, and are therefore in the way of the trench, that must be dug for pipe replacement.

In case of the Pipe Slice ® the head attached to the pulling cable have blades on it. Same hydraulic puller and the pulling cable is used but instead of a nose the pipe slice head is consist of the pointed edge and blades on. The blades are sharp enough to slice through the old metal and plastic pipes. Same torque is applied using the Hydraulic Puller. The Pipe Slice ® head slices the old pipe in pieces the head is double then the diameter of old pipe so it forces and penetrates the slices and broken pieces in dirt which gives enough room for the new pipe to slide in. The push and pull motion of the Hydraulic Puller keeps on pulling the Pipe Slice ® head and the new pipe which is attached to the Pipe Slice ® head keeps on sliding until it reaches to the destination hole. The replacement pipe used is either soft copper type K or flexible SDR pipe because these kind of pipes can make any turn very easily and don't break. They are strong and very durable. Then the connections are made on both ends one with the Gas meter and other with the inlet going in the house.

The image bellow is the courtesy of Mr. Drain ® Plumbing of to give you a detailed idea about how Pipe Slice ® process of replacing Gas lines work using Pipe Slitter or Pipe Slice ®

Contact Your Local Mr Drain ® Plumbing of today to learn more about Pipe Piercing and Pipe Slice process for replacement of Gas Lines with
a very minimum yard damage.
Save time save money call Mr. Drain ® Plumbing of today at

Plumbing Contractors Specialties
24/7 Emergency Plumbing Service - Residential and Commercial Plumbing Service and Repairs with free estimates, Bath/ Kitchen Fixtures and Faucets Repaired and Replaced, Water Heater Repair and Replacement, Garbage Disposals, Gas Lines, Water Lines, Electronic Leak Detection and Slab Leak Repair, Copper Repiping, Sump & Sewer Ejector Pumps, Toilet Repair, Toilet Install, Water Mains, Water Pumps, Water Wells, Emergency Plumbers.
Drain and Sewer Specialties
24/7 Emergency Service - Residential and Commercial Drain Cleaning , Drain Clogs and Sewer Line Cleaning with free estimates, Video Sewer Inspections, Trenchless Sewer Replacement or Excavation, Sewer Ejectors, Drain Repair, Drain Replace, Sewer Repair, Sewer Replace, Clogged Drain, Clogged Sewer, Clogged Toilet, Grease Traps, Septic Tank Pumping and Repairs, Septic Tank Inspection, Leach Lines and Leach Field, Storm Drains, Storm Drain Service, Storm Drain Maintenance, Floor Drains, Sink Drains, Toilet Drains, Tub Drains, Shower Drains..
Plumbing Fixtures Specialties
24/7 Emergency Service - Water Heater Repair, Fix and Replacement, Gas Lines, Water Lines, Anode Rod Replacement, Water Heater Maintenance, Water Treatment Systems, Whole House Water Filtration System, Tank Water Heaters, Tankless Water Heaters, Water Softener, On Demand Water Heater, Natural Gas Water Heaters, Electric Water Heaters, Ask Us About State Tax credits on High-Efficiency Tankless Water Heaters.
Mr. Drain® Trenchless " No Dig " Specialties
24/7 Emergency Service - Trenchless Sewer Replacement, Trenchless Sewer Repair, Trenchless Water Lines Repair, Trenchless Water Line Replacement, Trenchless Gas Line Repair, Trenchless Gas line Replacement, Pipe Bursting, No Dig Sewer Repair, No Dig Sewer Replacement.
Leak detection, line and utility location Specialties
24/7 Emergency Service, Leak Detection, Leak Location, Water Leak Detection, Water Leak Repair, Gas Leak Detection, Gas Leak Repair, Sewer Leak Detection, Sewer Leak Repair, Line Location, Utility Location, Slab Leaks, Water Leak Fix, Sewer Leak Fix, Drain Leak Fix, Gas Leak Fix.
Commercial Services Specialties
24/7 Emergency Service - All phase Commercial Plumbing Repairs, Installation, Repairs, Commercial Drain Cleaning, Drain Repair and Replacement, New Construction Plumbing, Remodeling Plumbing.
Mr. Drain® Hydro Flush Specialties
24/7 Emergency Service - Hydro jet Service, Hydro jet Main and Secondary Drain Lines from 1500 to 4000 psi, hydro jet Main Sewer Lines, hydro jet Secondary Drain Lines, hydro jet Floor Drains, hydro jet Sink Drains, hydro jet Tub Drains.
We are Located at:
4231 Business Center Dr 12 Fremont - CA - 94538
Local plumbers at Mr. Drain ® Plumbing of now serving following zip codes in .
The Trenchless Gas Line is the process to replace the Gas lines in both residential and commercial applications. Mr.Drain ® Plumbing of uses the Pipe Piercing also called Hammering process of replacing Gas lines by trenchless in and Pipe Slice ® technology to repair, replace and fix Gas lines by Trenchless in . No dig Gas line replacement in is our specialty. Save time save money call Mr.Drain ® Plumbing of Fremont today to replace and repair any Gas line by pipe slice, pipe piercing, and trenchless technology.
Trenchless Gas Lines  |   Trenchless Gas Line Fix in  |  Trenchless Gas Line Repair in  |  Trenchless Gas Line Replacement in  |  Trenchless Gas Line Contractor in  |  Pipe Piercing Service in  |  Pipe Piercing Contractor in  |  Gas Line Replacement by Bullet in  |  Gas Line Replacement by Pipe Slitter in  |  Pipe Slitting Service In  |  Gas Line Replacement by Pipe Slice |  |  Pipe Slice Contractor in  | Gas line Piercing in  |